Ultra-thin HDBaseT Extender
2
2. Panel Description
2.1 Transmitter
No.
Name
Description
①
LINK
HDBT Link status indicator:
OFF: No Link
GREEN:Link Successful
Blinking GREEN: Link abnormal
②
HDCP
HDCP compliant indicator
OFF: No HDMI traffic (no picture)
GREEN: Traffic with HDCP.
Blinking GREEN: Traffic without HDCP
③
Power
OFF: No power; RED: DC power present.
④
RS232
RS232 connector.
⑤
IR IN
Connect with 5V/12V IR receiver (with carrier) to collect
infrared signal, work with far-end IR OUT port
⑥
IR OUT
Connect with 5V/12V IR Emitter to send infrared signal, work
with far-end IR IN port
⑦
HDMI IN
Connect with HDMI source
⑧
HDBT OUT
Connect to the HDBT IN socket on the receiver via CAT5e/
CAT6a cable, support unidirectional PoE.
⑨
ETHERNET
100M Ethernet interface, when need to work in a LAN, one of
these 4 ports (both the Ethernet ports of transmitter and
receiver) should be used for internet access, and the others
⑩
ETHERNET
Tx
Rx
HDCP
LINK
TX
