Multi-function AV Distribution System
20
5.3.2 Setting Tab
To enter the configuration settings, click on the gear icon on the lower left corner of the
control interface.
PASSWORD
Change the password for the admin and user login screen.
DISPLAY CONTROL SELECT
Select whether the display will be controlled via IR or RS232.
DISPLAY/POWER SYNC
Select whether the display and system will be powered on and off simultaneously. This
option is only active if the display device is controlled via RS232.
When the mode is
ON
, press the
DISPLAY ON/OFF
button on control panel to turn
on or off the display device and system concurrently.
When the mode is
OFF
, press the
DISPLAY ON/OFF
button on control panel to turn
on or off the display device; press and hold the button to power on or off system.
I/O MODE SELECT
Enable (N.O.)/ disable (N.C.) fire alarm signal input.
