4K Home Distribution Hub
23
following figure). Set the network segment of the Matrix Switcher to the same as the
router’s, then PCs within the LAN are able to control the Matrix Switcher.
Follow these steps to connect the devices:
Step1.
Connect the TCP/IP port of the Matrix Switcher to Ethernet port of PC with
twisted pair.
Step2.
Set the PC’s network segment to the same as the Matrix Switcher’s. Do
please remember the PC’s original network segment.
Step3.
Set the Matrix Switcher
’s network segment to the same as the router.
Step4.
Set the PC’s network segment to the original ones.
Step5.
Connect the Matrix Switcher and PC(s) to the router. PC(s) within the LAN is
able to control the Matrix Switcher asynchronously.
Then it’s able to control the device via GUI.
GUI for TCP/IP control
The 4K Home Distribution Hub Kit provides with built-in GUI for convenient TCP/IP
control. GUI allows users to interact with this Kit through graphical icons and visual
indicators.
Type 192.168.0.178 in your browser, it will enter the log-in interface shown as below:
Router
Internet
PC
TCP IP Port
/
