manualshive.com logo in svg

Vivo 65, User Manual, Page: 188 / 228

Share
Download
Vivo 65 User Manual Download Page 188

188 Technical Specifications

Vivo 65 users manual

Doc. 006088 En-US U-1b

Vte/MVe Sen-
sor Error 
Alarm

A Vte/MVe sensor error 
occurs when the sensor for 
Vte/MVe measurement 
fails.

Red LED, audible 
alarm and a warning 
message on the display.

Ambient Pres-
sure Compen-
sation Lost 
Alarm

Loss of ambient pressure 
compensation data or 
ambient pressure sensor 
failure.

Yellow LED, audible 
alarm and a warning 
message on the display.

Ambient Tem-
perature Com-
pensation Lost 
Alarm

Loss of ambient tempera-
ture compensation data or 
ambient temperature sen-
sor failure.

Yellow LED, audible 
alarm and a warning 
message on the display.

Humidity 
Compensation 
Lost Alarm

Loss of humidity compen-
sation data or humidity 
sensor failure.

Yellow LED, audible 
alarm and a warning 
message on the display.

LED Failure 
Alarm

One or more LED indica-
tors on the front panel are 
broken.

Yellow LED, audible 
alarm and a warning 
message on the display.

Alarm for Low 
Alarm Battery

Alarm battery voltage is 
below alarm limit.

Yellow LED, audible 
alarm and a warning 
message on the display.

Alarm for 
Beeper Failure

Failure of the beeper con-
trol by the treatment pro-
cessor.

Red LED, audible 
alarm and a warning 
message on the display.

Internal Func-
tion Failure 
Alarms

Various types of internal 
function failures. For defi-
nitions, refer to Vivo 65 
Service Manual.

Red LED, audible 
alarm and a warning 
message on the display.

P

OWER

 S

UPPLY

S

PECIFICATION

AC supply

100 to 240 V AC, tolerance: +10%/-20%,
50 to 60 Hz, max 300 VA.

External battery

24 V DC, tolerance: 24 V ± 6 V.
Max 7 A, 140 W.

A

LARM

S

PECIFICATION

I

NDICATION

Summary of Contents for 65





































































































































































































































Reviews:

No comments