Vivitek DU8395Z, User Manual

Page: 13 / 69

DU8395Z Series DLP Projector - User Manual
UM83950922EN01
13
Remote Control
MENU EXIT
ENTER
1
4
7
0
8 9
6
3
5
2
HDMI1 HDMI1 HDMI2 HDMI2 DVI DVI
CLEAR CLEAR FREEZE FREEZE ID SET ID SET
3G-SDI 3G-SDI Displayport Displayport HDBaseT HDBaseT
VGA VGA ASPECT ASPECT COMPONENT COMPONENT
AUTO PC AUTO PC BLANK BLANK STATUS STATUS
On Use the button to turn on the projector.
OFF
Use the button to turn off the projector.
FOCUS Adjust the focus of the projected image.
ZOOM Zoom in/out the projected image.
TEST PATTERN Use the button to show the test pattern. Press this but -
ton again to switch to the next pattern. Press the EXIT
button to return to the projected image.
LENS SHIFT Use the button to move the lens right or left.
ENTER Use the button to select settings or confirm the changed
settings.
MENU Press the button to display or hide the OSD Menu.
EXIT Press the button to return to the previous Menu or exit
the OSD Menu.
AUTO PC
You can use this function to execute signal source auto
synchronization
BLANK
Press the button to temporarily interrupt the projection.
STATUS Show OSD MENU – SERVICE.
VGA Select VGA input source.
COMPONENT Select Component (V, H, B/Pb, G/Y, R/Pr) input source.
ASPECT Press the button to display aspect ratio options.
HDMI1 Select HDMI 1 input source.
HDMI2 Select HDMI 2 input source.
DVI Select DVI input source.
3G-SDI
Select 3G-SDI input source.
DisplayPort Select DisplayPort input source. (Not available for this
model)
HDBaseT Select HDBaseT input source.
CLEAR Erase the set ID number of the remote control; refer to
"Erase the identification number of the remote control
on page33 "
FREEZE Freeze the projected image or resume the projection.
ID SET Set up ID number for remote control; refer to "Using
Control ID for Multi-projector Application on page32
".
Wired Remote Jack Connect to WIRED REMOTE terminal on the projector