DU8395Z Series DLP Projector - User Manual
UM83950922EN01
12
Control Panel
ENGER
+ +
- -
POWER
User the button to turn on/off the projector.
INPUT
Push the button to select the input signal. HDMI, DVI,
VGA, Component…etc.
AUTO SYNC
Implement automatic signal synchronization.
ASPECT
Change the aspect ratio of the current image and push
the button to change to the next aspect ratio settings.
MENU
Push the button to display or hide the OSD menu.
UP/Down/Left/Right
Use the button to select the OSD option.
ENTER
Use the button to select settings or confirm the changed
settings.
EXIT
Push the button to return to the menu on the previous
level or exit the OSD menu.
CENTER LENS
Push the button to center the lens and calibrate the pa-
rameter of lens shift, focusing and zooming.
Note
The lens memory function requires the accurate lens
adjustment parameter. Please center the lens every
time after the lens is mounted.
Blank
Use the button to stop the projection temporarily
LENS SHIFT
Use these four buttons to move the projected image to
desired position.
Note
If the projected screen is too different with the project
-
ed position by user setting, please move the projector
or adjust the four adjustment feet of the projector to fix
the approximate projection position. Then use Lens
Shift this function to finely adjust the projection posi
-
tion.
FOCUS
Use the button to adjust the focus of projected image.
ZOOM
Use the button to zoom in/out the projected image.
Summary of Contents for DU8395Z
Page 1: ...DU8395Z User s Manual ...
