Vivitek DU8090Z User Manual Download

Page: 12 / 58

DU8090Z DLP Projector - User Manual

UM80900217EN02

Control Panel

POWER

User the button to turn on/off the projector.

INPUT

Push the button to select the input signal. HDMI, DVI,
VGA, Component…etc.

AUTO SYNC

Implement automatic signal synchronization.

ASPECT

Change the aspect ratio of the current image and push

the button to change to the next aspect ratio settings.

MENU

Push the button to display or hide the OSD menu.

UP/Down/Left/Right

Use the button to select the OSD option.

ENTER

Use the button to select settings or confirm the changed

settings.

EXIT

Push the button to return to the menu on the previous

level or exit the OSD menu.

CENTER LENS

Push the button to center the lens and calibrate the

parameter of lens shift, focusing and zooming.

Note: The lens memory function requires the accurate

lens adjustment parameter. Please center the lens every

time after the lens is mounted.

Blank

Use the button to stop the projection temporarily

LENS SHIFT

Use these four buttons to move the projected image to

desired position.

FOCUS

Use the button to adjust the focus of projected image.

ZOOM

Use the button to zoom in/out the projected image.

Summary of Contents for DU8090Z



























































Search results

Summary of Contents for DU8090Z

Reviews:

Related manuals for DU8090Z

Brands by name

Popular brands

Vivitek DU8090Z, User Manual

Search results

Summary of Contents for DU8090Z

Reviews:

Related manuals for DU8090Z

Brands by name

Popular brands