Vivitek DU8090Z User Manual Download

Page: 11 / 58

DU8090Z DLP Projector - User Manual

UM80900217EN02

IO Panel

TRIGGER(

12V +/-1.5V)

When connected to the screen through a 3.5mm cable,

the screen deploys automatically on startup of the

projector. The screen reacts when the projector is

powered off.

RS-232

The 9-pin D-sub interface is used to connect to the PC

control system and projector maintenance.

Component (V, H, B/Pb, G/Y, R/Pr)

Connect RGBHV or Component signal from computer or

component video enabled device

VGA

Provide the standard 15-pin VGA connection and can

connect to RGB, HD Component or personal computer.

MONITOR OUT

Connect to a monitor to display the projected content.

WIRED REMOTE

Connect the supplied remote controller to the projector

HDBaseT/LAN

Connect an Ethernet cable (Cat5/Cat6, not supplied) from

a computer, network device, or HDBaseT transmitter.

HDMI 1

Connect the HDMI cable from a computer or video device

DVI-D

Connect to DVI-D cable from a DVI-D output of the

device.

SDI IN/OUT

Connect to SDI source.

HDMI 2

Connect the HDMI cable from a computer or video device

3D SYNC IN / Out

Connect to the 3D IR synchronization signal transmitter.

Note for Wired Remote



Please make sure whether the port for insertion is correct before the terminal of the wired remote control is

inserted. The remote control may be damaged if inserted to the wrong port such as trigger. Do not use this jack for

anything other than intended use.

Note for Trigger



When the projector is turned on, a control signal (DC 12V) outputs from this terminal.



Do not use this jack for anything other than intended use.

Summary of Contents for DU8090Z



























































Search results

Summary of Contents for DU8090Z

Reviews:

Related manuals for DU8090Z

Brands by name

Popular brands

Vivitek DU8090Z, User Manual

Search results

Summary of Contents for DU8090Z

Reviews:

Related manuals for DU8090Z

Brands by name

Popular brands