45
Important
• If the RJ45 cables are not properly connected, the IP Address, Subnet Mask, Default
Gateway and DNS Server settings will display 0.0.0.0. Make sure the cables are properly
connected and perform the procedures above again.
• If you wish to connect to the projector in its standby mode, be sure you have selected
RJ45 and obtained the IP Address, Subnet Mask, Default Gateway and DNS Server
information when the projector is on.
Using network control
Once you have the correct IP address for the projector and the projector is on or in
standby mode, you can use any computer that is on the same local area network to
control the projector.
• If you are using Microsoft Internet Explorer, make sure it is version 7.0 or higher.
• The screen shots in this manual are for reference only, and may differ from the actual
design.
1. Enter the address of the projector in the address bar of your browser and press
Enter
.
2. The main page of the Network Control appears.
• Accessing to Network Settings or Email Alert page requires Administrator password. The
default password is "0000".
3
4
5
Summary of Contents for DH765Z-UST series
Page 1: ......
