4
Initial Camera Setup
Installing and Charging the Battery
Installing the Memory Card
To Charge the Battery:
1. Insert the battery (as shown above).
2. Power off the camera.
3. Connect one end to the supplied USB cable to
the camera and the other end to th
e computer’s
USB port or to the AC Charger (which is then
connected to a standard wall socket).
4. Allow the battery to charge for at least 3 hours
before using the first time.
5.
The charge light will turn off when the battery is
fully charged.
Micro SD Memory card (up to 32GB, Class 4 or
above) needed for normal use.
Turning On the Camera
Using the Camera
