5
B. Charge the battery using the USB connection cable (included) and the AC Charger (included).
This is the recommended method of recharging the battery.
- Connect the smaller end of the USB cable into the USB port on your camera.
- Connect the other end of the USB cable to the AC Charger and then plug the AC Charger into
a power socket.
- The charge light turns on when the battery is charging.
- The charge light turns off when the battery is fully charged.
Note
:
Some camera features will not work if the battery power level is low.
When the battery power is empty the battery icon turns red
and ‘Low Battery’ flashes on the LCD
screen. The camcorder automatically turns off a few seconds later.
The energy status of the power is displayed on LCD as shown below:
Full battery power
Medium battery power
Low battery power
INSTALLING THE SD MEMORY CARD
