Vividia
®
VA-880 USB 2-Way Pivoting Borescope
Vividia VA-880 USB 2-way articulating Borescopes
is specially designed to inspect hard-to-reach and see areas inside
complexed equipment, such as car evaporator, combustion chambers, and three-way catalytic sensors.
VA-880 Borescope
can
be connected to a PC or an Android device to preview images.
VA-880
has a small diameter, two-way 180
o
steering probe. It is
convenient for an end user to extend the small probe into a narrow space to get clear, omni-directional video, which is displayed
on a PC or Android device. One can also connect VA-880 scope on an iPhone or iPad with an additional wifi box (sold
separately). Also, a small USB monitor is available to be used with Vividia VA-880 without a PC, software, tablet or a smart
phone.
Note: The probe of product has an alarm when the temperature exceeds 70°C / 158°F. Do not use the scope over 70°C / 158°F!
Appearance
Operation instructions
1. Adjust LED brightness
Power on and the LED is the brightest by default. Press the power on/off button to adjust the brightness.
2. Snap a photo: Press the snap button on the handle to take photo or use software to take picture and record
video.
Application Environment
Vividia VA-880
can be used by professional maintenance and repair and diagnostic personals to inspect
precision instruments, engines, automobiles, boats, motorcycles, airplanes, and aircrafts, plumbing, building
and houses, air-conditioning systems, electrical equipment, mechanical system etc.
Important Notices:
•
Do not use this product on human body! This is not a medical device and it is not designed to be used
on human.
•
Keep this product out of reach of children to avoid damages or incidents.
•
Keep the product clean and do not put the whole product in water or other liquid.
•
Clean the tip and probe with lens-cleaning wipe or soft fabrics with isopropyl alcohol.
•
Keep the insertion tube as straight as possible when you bend the probe tip camera.
•
This product is electrically conductive. Do not use it on exposed wire or power charged areas.
•
Use the original USB cable and OTG cable adaptor if possible.
•
Do not turn the articulating wheel with care to avoid break the bending part.
