6
5.2.
Working with a remote control
Vivat Turn Table comes with an infrared remote control (IR) (pic. 2). It
runs on two AAA type batteries.
Button of IR remote initiate a test shoot.
- return to root menu.
Violet IR buttons duplicate buttons on the Vivat Controller (“left”,
“right”, “up”, “down”, “ok”).
and
- launch video and photo mode with pre-set parameters. You
can configure the program settings once and then launch it with one
button from IR.
Button starts manual mode.
In manual mode "left" and "right" violet buttons move the platform, and
buttons turn it 22.5 ° counterclockwise or clockwise.
IR remote buttons described in Table 1.
IR button
Function
Camera shutter release
Exit to root menu
Arrows
Menu navigation / value change / change direction of movement
OK
Select / stop the program
Launch video mode with pre-set parameters
Launch photo mode with pre-set parameters
Move platform at 22.5 ° counterclockwise in manual mode
Start manual mode / return to “zero point” in manual mode
Move platform at 22.5 ° clockwise in manual mode
Table 1. IR remote buttons
5.3.
The preparation of the camera
Before starting the work with Vivat Turn Table it is important to adjust the camera:
-
disable the autofocus on the lens or the camera body (depending on a model);
-
select the manual mode and adjusts the exposure according to the shooting conditions;
-
when shooting "Photo 360°” disable camera "auto turn-off" and " image review"
functions, also sometimes remote control option should be turned on (when shooting
video, it is not necessary).
In different cameras, same settings can have different names.
Pic. 2
