Moster 185 Plus - Maintenance manual - V1
71
3.10.2 Electric starter maintenance
Check the electric starter teeth: if they show signs of wear, replace them.
Check that the oring is still flexible [Only for MY22 version]]
3.10.3 Electric starter assembly
Insert the electric starter (5) into the crankcase housing.
Insert the 2 Allen screws M6x25 (3) with washers (4) into the electric starter (5) and tighten with
the torque shown in the figure.
[Only for MY22 version: Position the o-ring (2b) inside the reinforcement plate (2)]
Position the reinforcement plate (2).
Insert the 2 flange-head screws M6x25 (1) in the plate (2) and tighten with the torque shown in
the figure.
10 Nm
10 Nm