Electric Grout Remover
Safety Instructions:
Warning!
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
These instructions must be kept in a safe place so that the information that it contains is always available. These instructions must
accompany the equipment if it is transferred to somebody else.
We do not accept any liability for accidents or damage arising from ignoring the safety instructions.
1)
Work area safety:
a.
Keep the work area clean and well lit. Cluttered and poorly lit areas invite accidents.
b.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create
sparks that can easily ignite the dust or fumes.
c.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
2)
Electrical safety:
a.
Power tool’s plugs must match the outlet. Never modify the plug in any way. Do not use any adaptor plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b.
Avoid body contact with earthed objects, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock
if your body is earthed.
c.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d.
Do not abuse the cord. Never use the cord for carrying, pulling or un-pulling the power tool. Keep the cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Using an RCD
reduces the risk of electric shock.
3)
Personal safety:
a.
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool if you are tired
or under the influence of drugs, alcohol or medication. A moment of inattention while using power tools may result in serious
personal
injury.
b.
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-slip safety shoes,
hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack,
picking
up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch
on invites
accidents.
d.
Remove any adjusting key or spanner before turning the power tool on. A spanner or a key left attached to a rotating part of the
power
tool may result in a personal injury.
e.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f.
Dress properly. Do not wear loose clothing or jewe
lle
ry. Keep your hair, clothing and gloves away from moving parts. Loose
clothes,
jewe
lle
ry or long hair can be caught in moving parts.
g.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust related hazards.
4
）
Use and maintenance of power tools:
a.
Do not force the power tool. Use the correct power tool suitable for your application. The correct power tool will do the job better and
safer at the rate for which it was designed.
b.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
