Front Panel Operation
21
Setup Key
The
SETUP
key brings up a menu list so you can
reset the instrument to its default configuration.
Note that the Measurement Configuration
default is set to measure signals in the 40Hz to
500Hz frequency range.
•
Use to set Analog inputs and outputs. Note
that the AIO option provides additional
outputs, if fitted.
•
Use to set the IEEE488, RS232 interfaces
and Parallel printer. For more details refer
to
Interface Operation
on page 63.
•
Use to set the display format of time and
date information. Refer to
Setting/Format-
ting Time & Date
on page 31, for details.
•
Use to set the internal real time clock.
•
Use to enable the
ê
key to scroll the
display to the lowermost menu lines.
•
Use to perform “covers-on” software
upgrades.
Note:
Contact
Vitrek
for
specific details to
perform software
upgrades.
Local Key & Indicator
The
LOCAL
key is part of the
CONTROL
keypad.
•
Use to return control to the front panel
when using the IEEE488 interface to
another controller. For more details refer to
Interface Operation
on page 63.
•
The indicator light illuminates when front
panel operation is active.
SETUP
RECALL
STORE
CONTROL
CAL
LOCAL
Summary of Contents for Xitron 6000-2
