Vitrek Xitron 6000-2, User Manual

Page: 11 / 101

Introduction 11
Introduction
Congratulations on purchasing one of the high technology signal analysis
instruments available from
Vitrek.
The 6000 family of Phase Angle Voltmeters
offers the utmost in accuracy and flexibility.
These instruments contain an automatic switching power supply, thus no changes are
required for local AC supply voltage or frequency variations, simply select the power
cord extension that connects to your supplied power.
Features
The Phase Angle Voltmeter instruments are available as a two input, the 6000-2, and
as a three input, the 6000-3. Both have full accuracies available on all inputs fitted.
The following lists some of their significant features.
•
Fully digital signal processor (DSP) based operation, no analog phase-locked
loops, phase detectors or other delicate, inaccurate circuitry. These instruments
have a 0.0005Hz to 200kHz range of frequencies.
•
True 18-bit resolution on each input, which yields exceptional phase, amplitude
and harmonic resolution.
•
500kHz sampling frequency on each input simultaneously, which yields
excellent high frequency accuracies, even with heavily distorted waveforms, and
the widest range of harmonics measurement (up to the 2047th harmonic).
•
DSP based fundamental frequency component detection, which yields the widest
range of fundamental “reference” input, even when buried in noise and
distortion.
•
Two 40mHz 24-bit Digital Signal Processors for each pair of inputs, and one
68020 32-bit Central Processor, which yields the highest measurement speeds
available.
•
Full Range of measurement capabilities, not just amplitude, frequency and
phase. THD, inter-harmonic phase, spectrum analysis, cross-correlation are just
a few of the additional measurements available at the touch of a button.