29
FREQUENTLY ASKED QUESTIONS/ TROUBLESHOOTING
Question/problem - cause
Cause
Solution
The combi drill does not start:
•
The battery is not inserted;
•
ON/OFF switch electrical contacts are not in good
condition or it does not work;
•
Rotor or stator windings are damaged;
•
Short-circuited rotor windings;
•
Charge or replace it;
•
Repair or replace the switch;
•
Call technical assistance;
•
Call technical assistance;
The motor makes an abnormal sound, starts
intermittently or runs slowly:
•
ON/OFF switch electrical contacts are damaged;
•
Mechanical parts are blocked;
•
The combi drill is running over excessive pressure,
overloaded motor;
•
Repair or replace the switch;
•
Inspect the mechanical parts;
•
Reduce the pressure applied;
Combi drill overheats:
•
Overloaded appliance;
•
Poor assembly of the housing or pieces inside the
combi drill;
•
Faulty power supply;
•
Reduce the pressure applied;
•
Check if there is any blockage or part touching the
rotor;
•
Check the supply voltage and adjust it according to
the technical data;