26
When operating the impact wrench, plan pauses and
avoid operating it for long periods of time. Permanent
vibrations are harmful to health.
The control and safety devices installed must not be
removed or inhibited.
To avoid accidents, you should also take into
consideration
the
following
precautions
and
procedures:
▪
When operating the impact wrench, place yourself in
a stable position and always keep your balance. Hold
the appliance firmly to ensure continuous operation
and withstand unexpected situations;
When the rotary accessory gets jammed, switch off the
tool immediately.
▪
Make sure that the ventilation slots are not clogged.
Do not place any objects over the slots;
Maintenance and cleaning
Before performing cleaning, adjusting, accessories
changing, repairing and maintenance tasks, you must
remove the battery.
Replace worn out or damaged parts immediately, so
that the power tool is always in a safe operating
condition.
Cleaning:
Always keep the power tool clean and dry, free from oil
or grease. Clean all appliance components and
attachments after each use.
Do not use aggressive cleaning products. These
products
may
damage
plastics
and
metals,
compromising the safe operation of the power tool.
Maintenance:
Only maintenance works described in this instruction
manual may be carried out; all other works must be
performed by an official distributor.
Keep all screws and nuts well tightened in order to
ensure a safe operation.
If any components or safety devices are removed for
maintenance works, they must be repositioned
immediately and correctly.
Use only VITO-approved tools for this machine or
technically identical parts. Failure to do so may result in
personal injuries or damages to the impact wrench. If in
doubt, if you lack knowledge or resources, you should
contact an official distributor.
Technical assistance
The impact wrench should only be serviced by the
brand’s technical assistance center, or other qualified
personnel, replacing any necessary parts with original
ones.
ASSEMBLY INSTRUCTIONS
Battery
1.
Insert the battery (3) on the groove and slip it all the
way until you hear a “click” noise from the
lock/unlock button (4). At this point, the battery is
locked in place;
2.
To remove the battery, press the lock/unlock button
and pull out the battery.
Use VITO 20V lithium-ion batteries.
Charging the battery
1.
Fit the battery in the charger in the same way as you
would place it in the appliance;
2.
Plug the charger into the socket and let it charge.
Sometimes at the end of charging, both the battery and
the charger can be hot, which doesn't mean they
malfunction.
Let the battery cool down before fitting it into the
impact wrench.
Fitting and changing the drive impact sockets and bits
Remove the battery before fitting or changing
attachments.
1.
Fit the attachment, making sure it is securely locked
into place;
2.
To remove, pull it out.
