Vitl Lu-Mini, Instructions For Use Manual

Page: 66 / 85

Instructions for Use
66
7.7.2.3 Continuing a Multi-Tube Test from the Worklist
For a multi-tube test, it may be necessary to perform the Control reading and
then return some time later to perform the related Sample tube measurement
(for instance if the sample has been incubated).
This is achieved by pressing the
Worklist button on the Protocol screen to
display and select any unfinished tests.
Worklist Screen
Protocol
Screen
→ →
Cancel Jump to
End
Move
Up
Move
Down
Accept
Highlight the required sample test from the list and then press the
Accept
button to continue with that test, or the Cancel button to return to the
Protocol selection screen.
Tube Selection Screen
→ →