manualshive.com logo in svg

Vitek VT-DVR, User Manual, Page: 90 / 154

Share
Download
Vitek VT-DVR User Manual Download Page 90

 

 VITEK VT-DVR Series

 

89

VI.  CLIENT PROGRAM

 

 

1.  INSTALLING THE DVR WEB CLIENT 

 
There are two methods of installing the DVR web client.  The first method involves 
connecting to the DVR over the internet.  Once connected, the DVR automatically 
searches for the presence of the web client viewer.  If no client has been installed, the 
DVR will redirect to a server to download and install the plug-in.  The second method 
involves installing from the program CD that was supplied with the DVR.  Installing the 
DVR web client also installs the DVR local player.   
 
Before installing the DVR web client, please verify that the computer onto which the 
program is being installed meets the minimum requirements: 
 
 

1. 

CPU:  Intel Pentium III 800Mhz or equivalent 

2. 

RAM:  128 MB 

3. 

Video Card:  32MB 

4. 

Operating System:  Microsoft Windows 98SE/ME/2000/XP 

5. 

Internet Explorer version 6.0 

6. 

10/100 Base-T Ethernet Port 

 
 

Summary of Contents for VT-DVR



























































































































































Reviews:

No comments