Vitek VT-DVR, User Manual

Page: 51 / 154

VITEK VT-DVR Series
50
2. AUTO SEQUENCE MODE
This option enables the automatic sequencing of
cameras connected to the DVR. The default is
off.
The 4 CHANNEL DVR starts the automatic sequence mode when a single channel view
is selected. Press the Display button to switch back to 4 channel mode and to stop the
automatic sequence mode.
The 8 CHANNEL DVR and the 16 CHANNEL DVR will start the automatic sequence
mode when either the single channel view or the quad channel view is selected. Press
the Display button to switch to any other channel view modes to stop the automatic
sequence mode.
3. SEQUENCE INTERVAL
This option selects the amount of seconds each
channel (all models) or each 4 channel mode (8
CHANNEL DVR and 16 CHANNEL DVR) is
displayed. The default setting is one second.
The interval can be increased up to five seconds.
4. CAMERA SELECT
This option lets the user to select a camera and
adjust the following properties. Use the left and
right directional buttons to select each camera.
Numeric buttons may be pressed to jump directly
to the desired camera.
a
c
e
f
d
b
g
h