manualshive.com logo in svg

Vitek VT-DVR, User Manual, Page: 144 / 154

Share
Download
Vitek VT-DVR User Manual Download Page 144

 

 VITEK VT-DVR Series

 

143

IX.  FREQUENTLY ASKED QUESTIONS (FAQ) 

 

Digital Video Recorder 

 

1.  What does Embedded Linux mean? 
 
Embedded Linux means that the operating system of the DVR has been implanted 
onto the CPU (Central Processing Unit).  This means that the system response time 
is faster, is more stable, and that the core of the DVR is never affected by external 
factors, such as virus, hacking, and system failure due to hard drive abnormalities.   
 
2.  Could I watch the DVR through a regular TV or computer monitor? 
 
Besides the S-Video output, the DVR does not have a direct video output for TV or 
computer monitor.  However, a third party device or adaptor can be utilized to convert 
the BNC connector into RCA connector, or to convert the composite signal to VGA 
signal.   
 
3.  Is there a way to disable the password prompts? 
 
The administrator password prompt is never disabled.  However, the user password 
can be disabled by turning 

Auto Key Lock

 off from the 

System

 submenu.  Please 

refer to page 70 for more information.   
 
4.  How long, on average, does it take to a backup to an external device? 
 
Regardless of the speed of the external CD-RW/DVD-RW or hard drive, it takes 
about five minutes to backup one minute of video clip onto the external device.   
 
5.  Is the DVR upgradeable by CD or network? 
 
The DVR is not upgradeable either by CD or network.   
 
6.  Is there a way to recover my forgotten password? 
 
There is no way to recover the forgotten password.  Please contact the vendor or the 
manufacturer where the DVR was purchased.   
 
7.  How many different schedules can I set on the DVR? 
 
Up to 32 different individual schedules may be set.   
 
8.  Why do I get motion recording though nothing has moved on the screen? 
 

Summary of Contents for VT-DVR



























































































































































Reviews:

No comments