Vitek VT-DVR Page 127 User Manual Download

Page: 127 / 154

VITEK VT-DVR Series

126

4. DVRPLAYER – LIVE MODE

In Live Mode, individual DVRs and Virtual DVRs can be displayed and sorted in any
order.

1. INDIVIDUAL

DVR MONITORING

Double-click on a DVR icon when the DVR icon is blue (operating within the normal
parameters) to begin live monitoring.

a. DVR Name and Camera Title
The DVR name and the camera title is displayed on top left corner of each
channel. DVR host name will be displayed if Auto Scan feature was used.

b. Channel

Status

Displays the current status of each channel.

Indicator

Status

REC

Normal Recording

Wait

Connection in progress or Video Loss

Disconnected from DVR

Alarm

Alarm Recording

Motion

Motion Recording

Playback mode for individual channels

Live

Live monitoring only; no recording

c. Time
Displays the

local

time of the DVR’s location.

Summary of Contents for VT-DVR



























































































































































Search results

Summary of Contents for VT-DVR

Reviews:

Related manuals for VT-DVR

Brands by name

Popular brands

Vitek VT-DVR, User Manual

Search results

Summary of Contents for VT-DVR

Reviews:

Related manuals for VT-DVR

Brands by name

Popular brands