3
ENGLISH
STEAM IRON
Instruction manual
The iron is intended for ironing clothes, bedding
and for vertical steaming of fabrics.
Description
1.
Water spray nozzle
2.
Water inlet lid
3.
Continuous steam supply knob
4.
Burst of steam button
5.
Water spray button
6.
Handle
7.
Power cord protection
8.
Base
9.
Pilot lamp of the heating element
10.
Water tank
11.
Temperature control knob
12.
“Self-clean” button
13.
“max” water level mark
14.
Soleplate
15.
Beaker
SAFETY MEASURES
Before using the unit, read these instructions
carefully. Keep these instructions for future
reference.
Use the unit according to its intended purpose
only, as it is stated in this user manual. Mishandling
the unit can lead to its breakage and cause harm
to the user or damage to his/her property.
•
Before switching the unit on, make sure that
your home mains voltage corresponds to the
unit operating voltage.
•
The power cord is equipped with a “europlug”;
plug it into the socket with reliable grounding
contact.
•
To avoid fire or electric shock do not use
adapters for plugging the unit in.
•
To avoid power network overloading do not
switch on several electrical appliances with
high power consumption at a time.
•
Do not fill the water tank with scented liquids,
vinegar, starch solution, descaling reagents,
chemicals etc.
•
Do not let the power cord be on the ironing
board and touch hot surfaces.
•
During operation breaks put the iron on the
base (in vertical position).
•
Before plugging/unplugging the iron, set the
temperature control knob to the minimum
position and switch the continuous steam
supply off.
•
Always unplug the iron when you are not
using it.
•
To unplug the iron always hold the power plug,
do not pull the power cord.
•
To avoid electric shock, do not immerse the
iron, power cord and plug into water or other
liquids.
•
Before taking the iron away, pour out the
remaining water and let the unit cool down.
•
To avoid electric shock do not dismantle the
iron by yourself. If unit has damages, apply
only to an authorized service center.
•
For children safety reasons do not leave poly-
ethylene bags, used as a packaging, unat-
tended.
•
Attention!
Do not allow children to play with
polyethylene bags or packaging film.
Danger
of suffocation!
•
Do not attempt to repair the unit. Do not disas-
semble the unit by yourself, if any malfunction
is detected or after it was dropped, unplug
the unit and apply to any authorized service
center from the contact address list given in
the warranty certificate and on the website
www.vitek.ru.
•
Transport the unit in the original package only.
•
For environmental protection do not dispose
of the unit with usual household waste after
its service life expiration; apply to a special-
ized center for further recycling.
•
Keep the unit out of reach of children and dis-
abled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
BEFORE THE FIRST USE
After unit transportation or storage at low
temperature it is necessary to keep it for at
least two hours at room temperature before
switching on.
–
Unpack the iron; remove the protection from
the iron soleplate (14), if any.
–
Check the unit for damages; do not use the
iron in case of damages.
–
Make sure that the voltage of the mains cor-
responds to the operating voltage of the iron.
AUTOMATIC SWITCH-OFF FUNCTION
This model has two automatic switch-off
modes.
•
If the iron remains still for 30 seconds in hori-
zontal position, the heating element of the iron
VT-1234.indd 3
31.10.2017 17:13:23
