MGW Diamond
Multi-Channel HEVC and H.264 Portable Encoder
User Manual, Version 1.6
44
The System Page
In the
System
page you set the parameters of the following tabs:
•
Network Interfaces
•
Security
•
Date and Time
•
KLV Input
•
SAP.
Figure 4-7: The System page
To set the system parameters:
1.
From the main menu select
System.
2.
Set the desired parameters as required in each section and click
Apply.
To set the network interface:
Two network interfaces are available. Each one can be used for either management and/or
streaming.
For easier management of the system, Ethernet Port 1 and 2 can be configured in DHCP mode. If
DHCP mode is selected, the system will obtain the IP address automatically from the DHCP server.
