33
IFU-26 Rev. J | December 2021
Note:
If the device has already been paired, go directly
to
Step 3 “Take a Reading”
below.
The Nonin Model 3230 is an optional pulse oximeter
device that measures blood oxygen saturation (%SpO
2
)
and uploads readings automatically using Bluetooth. It is
clipped onto your fingertip. See figure to the right.
Your care team may direct you to take an oxygen
saturation reading with this device on a regular schedule
(for example, one or more times per day).
Refer to the
Nonin Medical Model 3230 Operator’s
Manual
for basic instructions on setting up the device,
usage instructions, and error messages.
Note:
Monitor battery life and replace batteries as
necessary.
1. Find the Bluetooth ID (Optional)
Note:
This step is optional, and is only necessary when
using the Model 3230 in an environment where multiple
similar devices are being used (such as a hospital).
To find the Bluetooth ID, turn the unit on its side and find
the etched numbers on the clip. See figure to the right.
The Bluetooth ID begins with “BDA”.
2. Pair New in VistaPoint
a.
Tap
Take SpO2
in the Oxygen Saturation tile. Tap
Use Bluetooth
and then tap
Pair New
. Tap
Nonin
Model 3230
as the model.
b. Apply the Model 3230 to the finger. The device will
turn on go into pairing mode (indicated by a white
Bluetooth symbol on the display).
c.
VistaPoint displays “Scanning for Devices”. Tap the
Bluetooth ID when it appears. It should match the ID
in
Step 1 above
. After you tap the Bluetooth ID, the
current oxygen saturation value will be measured and
you will be returned to the dashboard.
If you see a message asking you to confirm the
device pairing, tap
Confirm
.
d.
Pairing is now complete. Remove Model 3230 from
finger.
Section 26:
Oxygen Saturation (Nonin 3230 Fingertip)
Bluetooth ID
Apply to
Finger
Nonin 3230 Pulse Oximeter
Pairing the Device
Nonin Model 3230 (Fingertip)
Take Oxygen Saturation
Pair New
Use Bluetooth
Manual Entry
Currently using Bluetooth Upload.
No device is currently paired. Select
Pair New
to begin the pairing process.
Tap
Pair New
Tap Nonin
Model 3230
Tap Bluetooth ID
Apply to
Finger
Scanning for Devices
Devices Found:
00:0B:57:AC:0B:13
Tap
Use Bluetooth
Take SPO2