Vital Elite LTC Bed, Instruction Manual

Page: 26 / 34

Instruction manual VitalFlex Elite LTC Bed
Last update:03.16.2021 Page 25 of 34
10.2 Maintenance schedule
Carebed
Serial No.:
Location: Type “VitalFlex Elite LTC Bed “
……………………………… Responsible:
Inspector:
………………….
………………….
Pos. Test instruction OK n.OK Comment
1. Examination of the basic prerequisite
1.1 Is the general condition okay?
1.2
Type plate from the nursing bed and the electrical components,
legible?
1.3 Instructions for use available and accessible to personnel?
1.4 Appropriate and safe use?
2. Visual inspection
2.1 No surface damage or corrosion?
2.2 Mechanical components and welds without defects?
2.3 All mechanical connecting elements are fixed?
2.4 Lying surface floor without damage?
2.5 Firm fit and no damage to the head and foot end pieces?
2.6 All 4 rollers undamaged and fixed?
2.7 Central brake is undamaged and fixed?
2.8 Side rails without break, crack or other damage?
2.9 Fixed position of the side rails in their fastening?
2.10 Erector with grab handle and erector holder undamaged and no
deterioration?
2.11 Mains cable, connecting cables and plugs without damage?
2.12 Transport protection for mains plug available?
2.13 Strain relief for mains cable and handset securely fastened?
2.14 All plug connections are firmly plugged in? (sealing rings without
damage)
2.15 Correct and safe cable laying? (no damage)
2.16 Motor, SMPS power supply and mains plug housings without damage?
2.17 Manual operation without damage?
2.18 Thrust tubes of the height adjustment drives are undamaged?
2.19 Locking pin with safety bracket on backrest drive is freely accessible
for mechanical emergency lowering?
2.20 9V block batteries OK / expiration date sufficient until the next test?
2.21 Is the safe working load maintained?
3 Electrical test according to DIN EN 62353
3.1 Insulation resistance >7MΩ? Measured value:
3.2 Device leakage current <0.5mA? Measured value: