Instruction manual
VitalFlex Elite LTC Bed
Last update:03.16.2021
Page 23 of 34
The electrical components must not be sprayed with a high-pressure cleaner or water jet. Only
wipe disinfection is permitted.
9
Cause and remedy of malfunctions
Not every malfunction is directly attributable to a defect in the nursing bed. Before contacting your
dealer or Vital Mobility, please check the malfunction using the table below.
Disruption
Possible cause
Remedy
No function
Mains plug not plugged in
Plug in the mains plug.
Lock function on handset
activated
Unlock the handset.
Handset not plugged in
Insert the handset into the control
unit.
Drive not plugged in
Plug the drive into the control unit.
Reversed adjustment
functions
Connection cable on the
sockets reversed
Check plugs and sockets and
reconnect.
No function after power
failure
9V block battery is empty
Replace 9V block battery.
Bed moves very slowly
Bed can only be adjusted via
battery. Mains plug not
plugged in
Plug in the mains plug and replace
the 9V block battery preventively.
Summary of Contents for Elite LTC Bed
Page 2: ...Last update 03 16 2021...
Page 34: ......
