Instruction manual
VitalFlex Elite LTC Bed
Last update:03.16.2021
Page 14 of 34
6
Assembly and commissioning
Note:
The VitalFlex Elite LTC bed is supplied fully assembled.
6.1
Assembly of the trapeze (optional)
With the help of the trapeze, the patient can stand up and move more easily into another position.
A triangle handle is attached to the trapeze pole.
Insert the pole bow (optional) into the erecting fixture in the lying surface. Make sure that the
locking cylinder pin engages in the recess of the erecting fixture.
Attention: The erecting bracket must not be used outside the latching mechanism.
Engage the snap-in cylinder pin
in the recess
Pole admission
Slide the fixed loop of the triangle belt over the first bolt of the erector and check its secure hold by
pulling the triangle handle firmly downwards.
Attention: Fix the loop of the triangle belt only
between these two bolts!
Strap with buckle adjustable in length
Triangle handle
Pole bracket
After receipt of the series delivery, reassemble the trapeze and the pole socket, as the diameter may
differ.
Summary of Contents for Elite LTC Bed
Page 2: ...Last update 03 16 2021...
Page 34: ......
