Visual Productions CUECORE1, Manual, Page: 52 / 65

A.11 Recorder
Trigger Type Trigger Value Flank Description
Intensity Recorder # Change Intensity changed
Intensity Recorder # Down Intensity became non-zero
Intensity Recorder # Up Intensity became zero
End Recorder # - Recorder stopped
A.12 UDP
Trigger Type Trigger Value Flank Description
Message String - Receive a message that matches the trigger-value
Receiving - - Receive any message
The user can define his own string as the trigger value of a message. Please
note that this string has a maximum length of 14 characters.
It is possible to pass a parameter along with a message. In order to do
this use the syntax
trigger=value
. For example when the trigger type is set
to ’message’ and the trigger value is set to
intensity
then the transmitting
equipment can pass an intensity level by sending
intensity=255
, where 255
can be any number in the range [0,255].
A.13 Console
Trigger Type Trigger Value Flank Description
Cue change - Change Console changed cue
Cue change - Down Console changed to cue > 1
Cue change - Up Console changed to cue 1
Channel Cue # Change Cue activated or de-activated
Channel Cue # Down Cue activated
Channel Cue # Up Cue de-activated
A.14 Randomizer
Trigger Type Trigger Value Flank Description
Result - - The Randomizer made a new value
Specific Value Number - The Randomizer made a value that matches
52