MFR
August 2020
Visual Engineering
Video solutions. Integrated
visualengineering.co.uk
Page 13
The mechanism for configuring the MFR H.264 encoder is its web interface.
The screen below shows what is to be expected once a valid connection between the PC and MFR
encoder has been established by typing the encoder’s IP address into the web browser address bar.
In this example it is using the IP address 192.168.1.195
On the left side of the screen are the Control Menus which allow the user to configure various
encoder settings. The functions of these menus are described in the following sections.
User Menu
The user menu page allows users to
configure the user ID and password of
the encoder. It is necessary to confirm the
password to change it.
There is also the option to enable/disable
the following:
• FTP Server Connection
• OSD Print (On Screen Display)
• Audio Out - audio is not normally
included for MFR cameras
Changes are only enabled when the
submit
button is pressed.
Video Encoder Control
Control
Menus
The encoder’s IP address is typed in here.
In this example the IP address is
192.168.1.195
