Read the operating manual (found at www.vistalab.com/support) completely before using
the device for the first time. Also, observe the instructions for use of the accessories. This
instrument may sometimes be used with hazardous materials, operations, and equipment. It is
beyond the scope of these instructions or the manual to address all the potential safety risks
associated with its use in such applications. It is the responsibility of the user of this instrument
to consult and establish appropriate safety and health practices and determine the applicability
of regulatory limitations prior to use.
ali-Q is an aliquoting pipet controller designed for aspirating and dispensing aqueous solutions
with plastic or glass pipets in 0.1 to 200mL volumes. It Is intended for measurement, control
and laboratory use. Any use of this instrument in a medical or IVD setting is under the sole
responsibility to the user.
! Read the following carefully!
1. Every user must read and understand these instructions and operating manual before
operation.
2. Follow general instructions for hazard prevention and safety instructions; e.g., wear protec
-
tive clothing, eye protection and gloves.
3. Observe all specifications provided by reagent manufacturers.
4. Never use the instrument in an atmosphere with a danger of explosion. Highly flammable
liquids must not be pipetted.
5. Use the instrument only for pipetting liquids, with strict regard to the defined limitations of
use. If in doubt, contact the manufacturer or supplier.
6. Always use the instrument in such a way that neither the user nor any other person is
endangered. Avoid splashes. Only use suitable vessels.
7. Never use force on the instrument!
8. Use only original manufacturer’s accessories and spare parts. Do not attempt to make
any technical alterations. Do not dismantle the instrument any further than is described in the
operating manual!
9. Always check the instrument for visible damage before use. If there is a sign of a potential
malfunction, immediately stop pipetting. Consult the ‘Troubleshooting’ section of this manual or
contact the manufacturer if needed.
10. Only the original AC adapter can be used for recharging of the Lithium Ion battery. Do not
replace with non-rechargeable batteries or rechargeable batteries of other manufacturers.
11. The AC adapter must be protected against moisture and must be used only for this
instrument.
12. Only authorized service personnel may service the instrument. Unauthorized repair or
service may void the units’ warranty
13.
DO NOT AUTOCLAVE
ali-Q. Only approved parts and accessories may be removed from
unit for autoclaving.
14. WARNING! Improper use of the instrument or the battery (short-circuit, mechanical dam
-
age, overheating etc.) may cause the explosion of the battery.
Operating Conditions:
•
Operating Temp: 15°C to 40°C (59°F to 104°F)
•
Storage Temp:
-
20°C to +50°C (
-
4°F to +122°F)
•
Altitude up to 2000m
•
Relative Humidity: 10% - 95%, non-condensing
•
Atmospheric Pressure: 70 – 106 kPa (525 - 795 mmHg)
•
Vapor Pressure up to max. 500 mbar. Aspirate slowly above 300 mbar, to prevent
liquid boiling
ali-Q Body Chemical Compatibility for cleaning and decontaminating
Water, diluted ethanol or isopropanol. For more information on chemical compatibility, see the
support area of our website, www.vistalab.com/support.
Safety Instructions