Vista VK2 Series, User Manual, Page: 13 / 79

13
2.5 Network Connection & IP assignment
When a monitor is first connected to the network, it is necessary to allocate an IP address to the
device with the
“SmartManager” utility on the CD. (Default IP 192.168.30.220)
1)
Connect the network camera/device to the network and power up.
2)
Start SmartManager utility (Start > All programs > SmartManager > SmartManager). The main
window will display, and after a short while any network devices connected to the network will be
displayed in the list.
3)
Select the camera on the list and click right button of the mouse. You can see the pop-up menu
as below.
4)
Select Assign IP Address. The Assign IP window will display. Enter the required IP address.
NOTE: For more
information, refer
to the
SmartManager
User Manual.