Vista VK2 Series, User Manual, Page: 12 / 79

12
Use the MENU key on the IR Remote to access the Camera function menus.
Power key: Monitor power on/off
Mute key: Mute the Audio
Key: Up/Down/Left/Right scrolling the cursor to desired function.
OK key: Confirmation key during the OSD operation.
Menu Key: Camera OSD control.
Exit Key: Exit the OSD menu.
: Monitor OSD control.
Source : Select VGA/HDMI/CAMERA
Info :Information
NOTE: For instructions on loading logos into the monitor see page 70 section
3.6.5.1 PVM Logo Upload
2.4 Resetting to the factory default settings
To reset the monitor to the original factory settings, in the monitor web page, go to the Setup >
System > Maintenance web page (described in
“System
>
Maintenance” of User Manual) or use
the remote control "Menu > Restore Defaults > All
” change to YES and then click OK button.
CAUTION: When performing a Factory Reset, you will lose any settings that have been
saved. (Default IP 192.168.30.220)