VL-NVR 4/8/16CH Quick Guide V1.1
Page 18
3.1.2
Add manually
Refer below and input the IP address, port,
“Username” and “Password” of the camera required, then select the protocol. Click
“Test” to test the validity of the input information and then click “Add” button. Click
to delete any required camera. Click
“Default Password” to set the default username and password of each camera.
3.2
Edit Camera
Cl
ick “Edit Camera” in the setup panel to go to the interface as shown below. Click
to view the live image of the camera in
the popup window. Click
to edit the camera. Click
to delete the camera.
