VISSONIC Electronics Limited
Page 15
3.3 Unit authority settings
Log in to the upper computer management software of the conference system. In the management
mode, right-click the unit icon and click "Personnel authority" to set unit authority, such as ID,
speaking, vote, and sign-in authority.
3.4 Microphone status indication
The microphone on/off button
, LED ring on the gooseneck microphone and the screen show the working
status of the conference unit.
Microphone
button color
LED ring color
Screen
Status
Red (on)
Red (on)
Microphone on
Microphone on
White (off)
Green (wait)
Requesting
to
speak
Please wait...
Request to speak
3.5 Automatic shutdown
When the microphone is in the wireless state, you can directly turn off the host power, and the microphone will
automatically shut down 5 minutes after it is disconnected from the AP and has no signal.
3.6 Wired/wireless mode switching
When the wired mode is adopted by default, if the unit connection cable is faulty or the unit needs to be moved,
connect the AP to the AP port on the rear panel of the conference host. The connection cable can be removed when
the unit is working, and the unit automatically connects to the AP without interrupting the speech.
3.7 Restoring factory settings for the wireless unit
In the wireless mode, open "About" settings and click the bottom-right corner of the version repeatedly.
