1. DISPLAY
Once initially powered on, the display screen is on full display for 3 seconds. The refrigerator default setting is medium, and the LED 3
indicator will be illuminated. This is normal operation display in case of a failure, the appropriate LED light will flash in sequence.
In case of no failures, the current temperature setting of the refrigerator will be on display.
2. TEMPERATURE SETTING
Each time the temperature setting is pressed once, the temperature setting changes one time.
After the temperature setting has been completed, the refrigerator will run according to the set value after 25s.
From left to right, the temperature is lower.
The order of coldness settings is as follows:
3. STANDBY MODE
To enter standby mode, press the setting for 3 seconds when the refrigerator is running. In standby mode, the compressor will not
operate and the standby indicator light will be illuminated. To resume normal operation, just press the setting momentarily.
4. SETTING THE FREEZER TEMPERATURE
Turn the controls to adjust the freezer temperature.
Place frozen food into the freezer as quickly as possible after purchase. Pay attention to the storage time on the food packaging instruc-
tions. The storage life of frozen foods varies and the recommended storage time should not be exceeded.
FUNCTIONS
14
A. Setting button
B. LED1 COOL indicator
C. LED2 indicator
D. LED3 indicator
E. LED4 indicator
F. LED5 COOLEST indicator
G. LED6 STANDBY mode
A
COLD
SET
COLDEST
STANDBY
Hold SET-button for 3-sec
for standby
Temperature
Control
B
C
D
E
F
G
LED1
LED2
LED3
LED4
LED5
Mid
COLD
COLDER
TEMP.
CONTROL
Assembly
