INSTALLING THE DOOR HANDLE
□
Parts included with the handle kit:
STARTING
□
□
Before initial start, keep the refrigerator still for half an hour before connecting it to power supply.
Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or for above 4 hours in summer when the ambient
temperature is high.
INSTALLING AN OPTIONAL ICE MAKER
□
The refrigerator comes set up for ice maker installation, This refrigerator is compatible with Midea IM1800MD ice maker. Please refer to
individual ice maker installation instruction manual.
ENERGY SAVING TIPS
□
□
□
□
□
The appliance should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of the
direct sunlight.
Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer.
Foods that freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up inside
the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with cold air circulation,
making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the
door as soon as possible.
12
Pre-Installation
Screws (4)
Allen wrench
Handle assembly
Allen wrench
caps (4)
Allen wrench
screws (4)
You will need: A Phillips screwdriver and the included Allen wrench.
1. Insert the two Phillips-head screws into the refrigerator door on the side you prefer, then tighten.
2. Align the door handle with the screws.
3. Insert the two Allen-head screws through the side of the door handle and tighten with the Allen wrench.
4. Place the screw caps on the screws.
