MENUS AND FUNCTIONS
D-307503 PowerMaster 360 User's Guide
29
B. To set the time
5
4.
TIME 12:40P
At the blinking cursor position, enter the correct time, for example, “
8:55A
”,
using the numerical keypad.
3,
4
5.
When you are satisfied with the setting, press
to confirm.
TIME 08:55A
A "Success Tune"
☺
sounds, the display reads the set time, returns to step
2 and then reads the selected time format.
6, 7
☺
Return to step 2
Additional Information (section B.8)
1
For detailed instructions on how to select User Settings – refer to sections A.1 and A.2..
2
a. The display shows the currently selected format (indicated by a
symbol), for example, "
24 Hrs
".
b. You can now select either the 12 Hrs or 24 Hrs time format using the
or
buttons.
3
The display shows the Time in the selected Time Format, for example, "
12:40 PM
", with the cursor
blinking on the first hour digit "1". The letter that follows the displayed time indicates one of the following:
"A" = AM; "P" = PM and "none" for 24 Hrs time format.
When the curser is positioned on the AM/PM digit, you can set to "AM" with the
button and the
"PM" with the
button
4
You can move the cursor to the next or previous digit using the
or
buttons.
5
This setting can be performed only after completing steps 1 – 3 of section B.8A.
6
The time saved is displayed without the cursor, for example, "
08:55 A
" followed by the selected time
format.
7
You can now select another option in the User Settings menu (see section A.1 and section A.2), or quit
programming (see section A.3).
B.9 Setting the date & format
Here you can program or adjust the built-in-calendar to show the correct date in the required date format.
You can select between a "mm/dd/yyyy" and a "dd/mm/yyyy" date format.
Carefully read the section titled "Additional Information" according to the indicated references
1
etc. – see
table at end of this section.
A. To Set the date format
1.
DATE & FORMAT
Enter the [
USER SETTINGS
] menu and select the [
DATE & FORMAT
] option
and press
.
1
DATE DD/MM/YYYY
The display shows the currently selected date format.
2
2.
or
Click the
or
button until the display reads the desired date
format, for example, "
MM/DD/YYYY
" and press
to confirm.
DATE MM/DD/YYYY
3.
B. To set the date
7
4.
DATE 04/20/2014
At the blinking cursor position, enter the correct date, for example,
“
04/20/2014
”, using the numerical keypad.
3, 4, 5
5.
When you are satisfied with the setting, press
to confirm.
DATE 04/20/2014
A "Success Tune"
☺
sounds, the display shows the set date and returns to
step 2 and shows the selected date format.
6
☺
Return to step 2
