Visonic NEXT CAM PG2 Installation Instructions Manual Download Page 1

 

D-302893 

 

NEXT CAM PG2,  

NEXT CAM-K9 PG2 

Wireless, PowerG, PIR / Pet Immune Detectors with 
Integrated Camera 

 

Installation Instructions

 

1. INTRODUCTION 

The Next CAM PG2

 

is a 2-way, microprocessor-controlled, 

wireless digital PIR detector with integrated camera and 
microphone for alarm verification. Activated upon PIR detection 
or upon demand, the Next CAM PG2 sends clear images with 
optional audio to the Monitoring Station. It thus enables accurate 
status assessment of the premises. 

The PIR detector's features are as follows: 

  Up to 15 meters (49 ft). 

 90

°

 angle camera overlaps PIR field of view 

  10 meter (33 ft) range in complete darkness overlaps PIR rangge 

  Wall creep zone protection. 

 For pet immune version - Target Specific Imaging™ (TSI)

 

technology is used for distinction between human beings and 
pets weighing up to 38 kg (85lb). 

  Includes a fully supervised PowerG transceiver. 

  True Motion Recognition

™ 

algorithm. 

  No vertical adjustment is needed. 

 Temperature compensation. 

  Sealed chamber protects the optical system from insects. 

  Front cover and back tamper, for improved tamper protection. 

  White light protection. 

The camera's features are as follows: 

  Optional AC power 

  Up to 10 cameras 

  Optional audio with images for listen -in 

  Images multiplexed from all cameras 

  Color and back & white images 

  Auto-setup (brightness, contrast) 

  Camera tuning by simple walk-test 

  Day and night CMOS camera, with IR illumination. This allows 

taking pictures in full darkness without letting the intruder know. 

  Instant capture: guarantees capture of fast moving intruder.  

  Camera operation modes: 

o

  Post alarm – pictures are taken after detection by 

detector. 

o

  On demand – pictures are taken after a command from 

the monitoring station. 

 An event records 2 images per second. 10-15 images total 

(can be customized by request) 

  Works with repeaters for extended range 

 

A. 

Microphone 

B. 

Camera lens 

C.

 IR LED 

D. 

Light sensor 

E. 

LEDs 

B

A

C

D

E

 

Fig. 1. External View

 

 

2. SPECIFICATIONS 

GENERAL 
Detector Type:

 Dual element low-noise pyroelectric sensor 

Lens Data: 

No. of Curtain Beams / curtains: 

Next CAM PG2: 18 far, 18 mid, 10 close.  
Next CAM-K9 PG2: 18 far, 18 mid, 18 close. 

Max. Coverage: 

12 x 12 m,  (40 x 40 ft) / 90° 

Pet Immunity (Next CAM-K9 PG2 only): 

Up to 38 kg (85 lb). 

ELECTRICAL 
Internal Battery

6V Lithium battery (two CR-123A 3V batteries 

or two CR17450 3V batteries, in series) or equivalent.

 

Note: 

For UL installations use Panasonic, Sanyo, GP or Varta 

only. Use only the above battery. Dispose of used battery 

according to the manufacturer's instructions.

 

Nominal Battery Capacity:

 6V 1450 mA/h (2xCR123A), 2200 

mA/h (2xCR17450) 

Battery Life (for typical use):

 4 to 5 years (CR123A) / 8 years 

(CR17450). 

Optional MAINS supply: 

Additional to batteries, 7.5 V DC. 

Power Supply:

 Type C 

FUNCTIONAL 
True Motion Event Verification

: 2 remote selections - 1 (OFF) 

or 2 (ON) motion events 

IR Illumination: 

10 m (33 ft) 

Picture Resolution: 

320x240 pixels QVGA 

Frame Rate:

 up to 2 fps (for user) 

Alarm Period:

 2 seconds 

A.

 TOP VIEW 

B.

 SIDE VIEW 

C.

 Next CAM PG2: 0.5-

4m, Next CAM-K9 
PG2: 2-4m 

3

6

12  m

0

10

20

30

40 ft

9

0

3 (10ft)

6 (20ft)

9 (30ft)

3 (10ft)

6 (20ft)

9 (30ft)

90°

3

6

9

12  m

0

2.4 m

(8 ft)

10

20

30

40 ft

B

A

C

 

Fig. 2. Coverage Pattern & Walk-test

 

Reviews: