5
Shipping Dimensions
Box 1: 1050 x 350 x 200 mm (weight: coming soon)
Box 2: 330 x 220 x 150 mm (weight: coming soon)
Box 3: 780 x 380 x 240 (weight: coming soon)
Box 4: 1650 x 280 x 280 mm (weight: coming soon)
LabRail installation
Suspension principle
The standard rail consists of eight 1.5-m rail pieces. Not all pieces need to be
installed for the system to work
–
just choose your own preferred length. The rail can
also be prolonged with more rail pieces from Viso Systems.
Gravity and symmetry holds the assembly in place.
Hence it is important that eyebolts in your ceiling are firmly attached to the building
structure (not to suspended ceiling parts or the like). It is also important that the
suspension wires are symmetrical around the rail. This is to avoid skewing of the rail
and to secure balance. The rail suspension is very flexible when it comes to ceiling
heights. The suspension wires can be as long or as short as desired.
The rail is intended to be assembled as a whole on the floor. When this is completed,
wires are attached. The whole rail is lifted manually (about 5 people needed) to its
permanent position and wires are tightened and cut to length.
The dolly, end stop, injector, monopod and cables are installed. Your LabSensor fits
directly onto the monopod.
