Vislink UltraReceiver, User Manual

Page: 14 / 42

UltraReceiver User Manual
Specification
Issue No: 3 Page: 8
Ref: ULRX-ASUM-700X
Copyright © 2018 Vislink plc

4 x UHF inputs, 70-860MHz. Switchable LNB power.

ASI input (ISO/IEC 13818-2 188 bytes) for ASI in.

Frame Lock input (black/burst or HD tri-level)

Camera Control / Mpeg data channel interface on 6-pin Lemo (CTRL/DATA)

10/100/1000 Ethernet connection for Video-over-IP connections

Up to 4x embedded audio outputs

ASI output (ISO/IEC 13818-2 188 bytes)

Audio output on two 3-pin XLRs (channel 1) and 5-pin Lemo (channel 2)

4 x 3G-SDI SMPTE-424M

4 x HD-SDI SMPTE-424M

480i@29.97 (*Future option)

576i@25 (*Future option)

720p@50/59.94/60

1080i@50/59.94/60

1080p@23.98/24/25/29.97/ 30/50/59.94/60

2160p@23.98/24/25/29.97/ 30/50/59.94/60

MPEG-1 Layer 1 20-bit 48kHz (*Future option)

MPEG-1 Layer 2 20-bit 48kHz (*Future option)

SMPTE 302M 20-bit 2 channel 48KHz 8ms frame
CAUTION: Keep the side-vents clear to allow adequate airflow.

1U height, half rack width

210mm [8.3"] x 350mm [13.8"] Deep (excluding connectors)

1.2kg/2.6 lbs. (approximate)

100 to 240VAC; 100W (approximate, depending on configuration)

AC input option 90 VAC to 264 VAC 50Hz to 60Hz; max current 1A(rms) DC input
option 9 VDC to 36 VDC (-ve chassis earth); max current 10A 70Watts excluding the
downconverters requirements.

100W max allowing for downconverters and cables.