Vislink Strata RX, Technical Reference Manual

Page: 102 / 186

Installation 6-6
Strata RX
Technical Reference Manual
Figure 6-6: Panel Power Connector - Front View
Figure 6-7: Mating Power Cable Connector - End View
A
B
C
D
E
F
G
H
Power Cable Assembly
A prefabricated cable assembly is
available that connects the RXU or RCU to the Strata ACU
Power Supply. It is available in two lengths. One cable is
provided with each Strata ACU ordered.
The Vislink part numbers for this cable are 907481-1 (3’ / 1 m)
and 907481-2 (10’ / 3 m). It comes complete with 8-pin
connectors wired on each end.
6.6.3 Additional Powering Notes
Check the electrical supply to be sure it can provide all the power
needed at the site without overloading. Power ratings for
equipment can be found on a rating plate, usually on the rear
panel. If necessary, consult a licensed electrician.
Table 6-1: Power Connections
Pin Function Comment
A DC Power (+) Use 18 ga. stranded wire for
lengths up to 10’ (3 m). Use 1
wire for each pin (3 wires total).
Consult factory if you need
longer cabling.
B
C
D DC Return (-) Use 18 ga. stranded wire for
lengths up to 10’ (3 m). Use 1
wire for each pin (2 wires total).
Consult factory if you need
longer cabling.
E
F Not Used
G
H