Visioneer Strobe XP 220, User Manual, Page: 125 / 140

120
V
ISIONEER
S
TROBE
XP 220 S
CANNER
U
SER
’
S
G
UIDE
H
OW TO
R
EPLACE THE
P
LUG
A
DAPTER
The three plug adapters you received with your scanner means you can
use the power supply with electrical outlets in different countries.
To remove and replace an adapter:
1. Unplug the power supply from the wall outlet.
2. Press down on the latch that holds the adapter in place.
3. While keeping the latch pressed down, slide the adapter down and
off the power supply.
4. To place a new adapter on the power supply, use the procedure
described on page 13 of this User’s Guide.