manualshive.com logo in svg

Visioneer Rabbit PC30dwn, User Manual, Page: 67 / 121

Share
Download
Visioneer Rabbit PC30dwn User Manual Download Page 67

Visioneer

®

 Rabbit™ PC30dwn

Copying

64

User Guide

3.

The copying process for the front side will automatically begin. The ID card will be guided through the 
feeder.

4.

Once the copy of the first side is complete, observe that the 

Status Light

 is flashing. Load your 

document with the 

back side facing outward

 and align the paper to the right edge of the feeder.

5.

The copying process for the back side will automatically begin. The ID card will be guided through 
the feeder.

6.

Once the scanning is complete the printing will begin. The printer will print one side, then the other 
side automatically.

MULTIPLE ID CARD COPIES

Note: 

When the Duplex Light is lit and your original document is smaller than the A5 size (210 x 148 mm), the 

machine will enter into the ID card mode and automatically print the front and rear sides of your original on the 
same side of the sheet.

1.

Press the 

Mode

 button until the 

Duplex Light 

is lit as indicated.

Status Light

Mode Button

Duplex Light

Summary of Contents for Rabbit PC30dwn


























































































































Reviews:

No comments