Visioneer Rabbit PC30dwn, User Manual

Page: 60 / 121

User Guide
57
C
O P Y I N G
Always remove any staples or paper clips from documents before inserting them into the copier. Staples
and paper clips can jam the feed mechanism and scratch the internal components. Also remove any
labels, stickers, or Post-It™ notes that may come off during the scanning process and get stuck in the
device. Misuse as described here will void your device’s warranty. Please go to
www.visioneer.com
,
select your product, and then click the
Warranty Program
link to view the warranty terms and conditions
for your device.
SUPPORTED DOCUMENT TYPES
■
Maximum amount of paper in the copier
■
1 pages of 20 lbs (80 g/m
2
) new printer paper
■
Document size
■
Minimum size (width x length) – 2 x 2 inches (51 x 51 mm)
■
Maximum size (width x length) – 8.5 x 14.0 inches (216 x 356 mm)
■
Paper thickness between 7–110 lbs paper (28–413 g/m2)
■
Embossed plastic card up to 1.25 mm thick
DOCUMENTS TO AVOID COPYING
The documents in this list can be copied, but please note that scanning documents of this type will
reduce the life of the device. Maintenance will be required more often and replaceable parts will wear
faster. These types of documents will jam more frequently and damage to the original documents may
occur. If you do choose to scan these document types, do not scan large batches. This type of use is not
covered under the device warranty and alters replacement parts life expectancy.
We recommend you limit the amount or completely avoid copying documents that are in this list.
■
Curled, wrinkled or folded documents may cause paper jams or multiple pages being fed through the
device at one time.
■
Perforated or punched paper that could tear when the separation roller engages.
■
Coated paper or photographs where the coating can flake off during scanning and leave residue in
the device.