manualshive.com logo in svg

Visioneer PATRIOT P90, User Manual

Share
Download
Visioneer PATRIOT P90 User Manual Download Page 13

S

CANNER

 U

SER

’

S

 G

UIDE

13

I

N S T A L L A T I O N

Please make sure of the following before you begin installation:

n

If you are prompted to reboot during installation, please select “No”. Finish installing the rest of the software, 
then close all open windows and reboot your computer. 

n

The information in this guide may cover software not provided with the scanner you purchased. Please 
disregard any information about the software not applicable to your scanner.

n

If your computer has AntiVirus or AntiSpyware software running, you may encounter alerts or messages 
during installation asking you to allow the installation to proceed. Although the messages will differ based on 
the software your computer is running, in each case you should allow the installation to proceed if that 
option is available. Alternatively, you can turn off the AntiVirus or AntiSpyware software before installing your 
scanner, but if you do, make sure to turn it back on again when installation is finished.

n

If your computer is running Windows 7 or later, you may see the Windows User Account Control screen 
asking you to confirm system changes. Click the Yes button to allow the installation to proceed.

I

NSTALL

 

THE

 S

OFTWARE

 

AND

 C

ONNECT

 

THE

 S

CANNER

1.

Start Microsoft Windows and make sure that no other applications are running.

2.

Go to

 www.visioneer.com/install

.

3.

Launch the installer once the download is complete.

Summary of Contents for PATRIOT P90






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands