Visioneer ONETOUCH - FOR WINDOWS, User Manual, Page: 65 / 78

V
ISIONEER
O
NE
T
OUCH
U
SER
’
S
G
UIDE
64
3. The OneTouch Link Properties for this destination opens.
4. Click Browse to open the Windows file browser and navigate to the location of the application’s
executable (*.exe) file.
In most cases, the application’s directory is located in the programs directory on the C:\ drive.
Because you can select any executable file, make sure you select an application that can receive image
or text files.
5. Select the application’s *.exe file then click on Open .
The application’s *.exe file path will now show in the Application path field.
6. Click on OK to close the Link Properties window.
For basic scanning, you do not need to adjust any of the other settings in this window. The default
settings will work with most applications. The advanced settings are described below.
7. Select a file format and scan configuration in the OneTouch Properties window.
If you select a text file format, the scanned image is converted into editable text before being sent to
your selected application.
8. Click on OK to close OneTouch.
9. Put the document(s) in the scanner and start scanning with the button you set to use the Send to
Application destination.
10. The scanner starts scanning and, when finished, sends the scanned file to the application you
selected.
Technical note
• After configuring this link, you may need to click Refresh in the OneTouch Properties window to
show the correct application icon in the Select destination list.