Visioneer ONETOUCH - FOR WINDOWS, User Manual, Page: 15 / 78

V
ISIONEER
O
NE
T
OUCH
U
SER
’
S
G
UIDE
14
• Skip blank originals —Select this option to have the scanner detect if a blank page has been fed
through the scanner, and remove it from the final file. Typically you might use this option when
scanning a stack of two-sided pages which have a number of blank sides.
Sensitivity —You can adjust the sensitivity level of the blank image detection. For instance, if you are
scanning double-sided light-weight paper, the scanner may not detect a blank side as text or images,
from the opposite side of the page, may appear in the scanned image. In that case, lower the
sensitivity level for more accurate results.
Note that when the Options tab feature
Use job separator in multi-page batch is enabled, and the
option selected is When a blank page is detected , the sensitivity level for Skip Blank Originals is the
sensitivity level that will be used when both features are enabled.
Note that when the feature
Use job separator in multi-page batch is enabled, and the option selected
is When the number of images reaches , the blank originals are discarded before the images are
counted. For example, if you scan 3 pages in duplex mode, each side of the page is counted as an
image and the total number of images is 6. When Skip Blank Originals is enabled, and 2 of the 3
pages in the stack are blank on one side, the total number of images counted is 4 not 6.
• Color Filter —Color filter is the ability of your scanner to automatically remove a color from a
scanned image. For example, if you are scanning a letter with a red watermark, you can choose to
filter out the red so the scanned letter just shows the text and not the red watermark. Color filter
applies to Black & White or Grayscale scanning modes.
• Double Feed Detection —Selecting this option turns on the scanner hardware feature that detects
when multiple pages feed through the scanner at one time. This option is only available if the scanner
supports this feature.
Abort —scanning stops and all pages scanned in this batch, up to this point, will be deleted.
Prompt —you will be prompted to remove the pages in the ADF, restack the remaining pages and
continue scanning. All pages scanned before and after the double page feed are saved.
The original with a red
watermark over black text. The scanned item with the
red filtered out.